1-800-859-6265   FAX: +1 (586) 731-2274
Select Page

neoVI FIRE 3 Specifications

Protocol Support

  •  OBD
  • J1939: Includes J1939 DBC, BAM, RTS/CTS
  • UDS (ISO 14229):
  • Services include $19, $22, $23, $2A, $2C
  • DBC, A2L (ASAP2 File), GDX, MDX, ODX support
  • CCP: Includes A2L (ASAP2 file) and ROB support
  • XCP: Includes A2L (ASAP2 file) and ROB support

Networks / Inputs 

  • 16 x Dual wire CAN (all baud rates supported)
    • 14x Dedicated Classical CAN / CAN FD
    • 2x switchable to SW CAN, LSFT CAN, or LIN
  • 8x LIN / K Line / KW2K / ISO 9141
    • 6x Dedicated LIN
    • 2x switchable to SW CAN, LSFT CAN, or LIN
  • 3x Ethernet Interfaces
    • 2x RJ-45s available directly on the neoVI FIRE 3 device
    • 1x RJ-45 port additionally available when utilizing provided adapter cable at 100 Mbps

Device Specifications 

  • Low power consumption
  • Comatose: 500 microamps
  • Fast wake: 70 milliamps
  • Power supply: 5-60V operation
  • LEDs: 10 programmable tri-color LEDs
  • 2 LEDs for legacy status; 2 user buttons
  • Temperature range: -40°C to +85°C
  • On-board UPS for safe shutdown of data logger
  • Dimensions: 60cm by 11.22cm by 3.97cm
  • LEDs (user programmable): 10 programmable tri-color LEDs
  • SD card: 2 card slot support for up to 2 TB of storage; card
  • formatted using FAT32 for PC compatibility
  • DAQ Ethernet
  • Vehicle connectors: 26-pin male HD D-sub
  • One-year limited warranty
  • Field-upgradeable flash firmware
  • General purpose I/O: 4 MISC IO (0-40V); can be configured as analog/PWM IO
  • General purpose I/O rate report interval: 10 Hz to 1 kHz, or based on digital change
  • USB host for RAD-IO2 or neoVI MIC2
  • Standalone mode for use in scripting, receiving messages, transmitting messages, expressions, I/O and transport layers
  • J2534 and RP1210 A/B compatible for CAN / ISO15765- 2:2016 (CAN FD)
  • Battery-backed real-time clock (RTC)

Timing Specifications

  • 64-bit timestamping to an accuracy of 25 nanoseconds on all networks
  • Simultaneous operation on all CAN/LIN networks
  • Transmit message double-buffering on all networks, allowing back-to-back message transmission

Network Specifications – CAN

  • 16 x ISO CAN FD channels
  • CAN 0B compatible for all CAN networks
  • 16 dedicated ISO 11898 Dual Wire CAN FD physical layers (TJA1043)
  • LSFT CAN mode: 2 Low Speed Fault Tolerant CAN physical layers (TJA1055)
  • SW CAN mode: 2 Single Wire CAN physical layers GMW3089/SAE J2411(MC33897)
  • Listen-only mode support

Network Specifications – LIN / K Line / KW2K / ISO 9141

Up to 8x LIN (Local Interconnect Network)

  • Full support for LIN X, 2.X and J2602
  • LIN J2602 / X compatible physical layer
  • Software-enabled 1K LIN Master Resistor per channel
  • LIN Bus Monitor Mode identifies errors: Sync Break Error State and Length, Sync Wave Error, Message ID parity, TFrameMax/ Slave Not Responding, Checksum Error and Transmit Bit Errors
  • LIN Bus Master Mode operates at same time as LIN Bus Monitor
  • LIN Bus Slave simulation, with or without an LDF file
  • LIN Bus hardware schedule table with support for LIN diagnostics
  • Initialization Waveforms, including Fast Init, Five Baud, and Custom
  • Software-selectable baud rateInitialization Waveforms, including Fast Init, Five Baud, and Custom
  • Software-selectable baud rate

Ordering Information

Part Number Description
NEOVI-FIRE3 neoVI FIRE 3 with Vehicle Spy Trial

Specifications subject to change; please contact Intrepid for the latest information. All trademarks are the property of their respective owners.