RAD-wBMS Specifications

General Specifications

  • Interface to PC via Ethernet or USB 2.0
  • Power supply: 6-40V operation via barrel jack; use included power supply
    or vehicle power
  • Ten scriptable, multi-color LEDs indicate link status and modes of operation
  • All components rated -40°C to +85°C
  • One-year limited warranty
  • Field-upgradeable binary flash firmware
  • Flash firmware functionality
  • ADI wireless interface API (WIL)
  • Royalty free configuration only version of Intrepid’s Vehicle Spy3 software
  • Standalone mode, including scripting, receive messages, transmit messages,
    expressions, I/O and transport layers
  • Dimensions: 5.41” × 3.43” × 1.43” (13.7 × 8.72 × 3.62 cm)
  • Weight: 0.65 lb (295 g)

Timing Specifications

  • 64-bit timestamping with 25ns precision across all networks
  • Simultaneous operation on all CAN FD networks

Network Specifications

  • 2x CAN / CAN FD channels: two dedicated ISO11898 Dual Wire CAN physical layers (ADM3056EBRIZ)
  • Software-switchable between ISO CAN FD and non-ISO (Bosch) CAN FD versions
  • Up to 1 Mb/s software-selectable baud rate for arbitration phase
  • Up to 8 Mb/s software-selectable baud rate for data phase
  • Listen-only mode support
  • CAN FD implemented using the Bosch MCAN CAN controller IP
Ordering Information

Part Number Description
RAD-wBMS-E Network Interface for ADI Wireless Battery Management System (ADI wBMS) “Engineering” Version
RAD-wBMS-P Network Interface for ADI Wireless Battery Management System (ADI wBMS) “Production” Version

NOTE: Purchase of this product is subject to approval by Analog Devices, Inc., and an NDA may be required with Intrepid Control Systems.