1-800-859-6265

How to Disassemble and Reassemble the neoVI PI

How to Disassemble and Reassemble the neoVI PI

April 5, 2023

Watch this video if you are looking to disassemble and reassemble process of the neoVI PI. First, we will show you how to remove the red boots and the end plates of the case. Then, we will demonstrate how to disconnect the board from the top piece of the case and carefully remove the ribbon. Once the neoVI PI has been disassembled, you’ll be able to take a closer look at each aspect of the product inside the case. Next, we will guide you through the reassembly process, step-by-step. We recommend counting all the pieces before starting to ensure that you still have everything you need. Then, we will show you how to reattach the ribbon wire, slide the case pieces back into place, and reattach the end plates. Finally, we will secure the boots back over the edges, and your neoVI PI will be fully assembled!

The neoVI PI is the automotive industry’s first robust platform for the Raspberry Pi. This platform has a built-in Raspberry Pi 4 Compute Module with quad 64-bit processors, a gigabit Ethernet port, and Intrepid’s CAN FD technology. With up to four CAN FD networks, the neoVI Pi has all the features of the RPi4 CM, making it a powerful tool for automotive engineers.

You May Also Like…

JapanKoreaChinaUSA