1-800-859-6265

neoOBD 2 LC

차량 IoT를 위한 저비용 오픈 플랫폼 OBD 인터페이스
Home » neoOBD2 » neoOBD 2 LC

neoOBD 2 제품군 개요

neoOBD2 DEV(프로토타이핑 및 개발)

neoOBD2 LC(대량 배치)

안내 책자

제품 사양

neoOBD2 SIM (CAN Simulator)

neoOBD2 SDK (GitHub)

당신은 IOT를 알고 있고, 인트레피드는 차량 데이터를 얻는 방법을 알고 있습니다. neoOBD 2 LC는 이러한 지식 영역을 결합하는 핵심 요소입니다. IoT에 대비한 형태의 차량 데이터를 얻는 것은 그 어느 때보다 쉬워졌습니다.

맞춤형 커넥티드 차량 솔루션의 대량 배치를 위한 모듈식 차량 네트워크 어댑터

특정 요구사항에 맞게 사용자 지정된 대규모 무선 OBDII 어댑터를 배치하십시오. neoOBD 2 LC는 neoOBD2 하드웨어 라인업의 대량 배포 모델입니다. 무선 연결을 위한 세 가지 옵션이 있습니다. Wi-Fi ARM MCU, Bluetooth Low Energy ARM SoC, and LTE-M1 / NB1 / EGPRS LPWA cellular modem with built-in GPS.

You have complete access to raw vehicle network data within these modules, via secure APIs that interface to Intrepid’s proven CAN, LIN, and KLINE drivers. You have the ability to provide the vehicle network data over Wi-Fi, BLE, and LTE-M1 / NB1 / EGPRS cellular modem to the Internet and other mobile devices.

neoOBD 2 LC

Key Features

  • Up to 4x CAN FD
  • Up to 1x SW CAN
  • Up to 1x LIN / K-Line
  • Up to 1x Ethernet
  • Choose a combination from the following three Wireless Modules:
    • ARM Cortex M4 Wi-Fi SoC to host your Wi-Fi IoT application
    • ARM Cortex M4 Bluetooth Low Energy MCU to host your Bluetooth IoT application
    • NB-IoT / LTE-M1 / EGPRS LPWA cellular modem with built-in GNSS GPS engine
  • Intrepid’s secure API provides complete access to all vehicle network data from Wireless MCUs
  • neoOBD2 SDK with sample projects and documentations available for AWS IoT Core and Microsoft Azure IoT Hub
  • General purpose engineering tool for OBDII, enabling a wide array of applications such as data logging, simulation and gatewaying
  • Prototype new cybersecurity solutions for vehicle networks
  • Unique configurable OBDII pin design through NeoVI Universal Connector (NUC) architecture
  • Optional 9-axis Inertial Measurement Unit
  • Optional RTC with battery
  • 32GB eMMC storage

 Applications

  • CAN, CANFD, LIN, KLINE, DoIP in-vehicle network interface to Wi-Fi, BLE, and NB-IoT / LTE-M1
  • Low-cost OBDII interface to commercial cloud-based IoT services as well as proprietary servers in strict private network environment
  • Create your own OBDII interface with Internet and Bluetooth connections
  • Stream vehicle network data in real-time over the air
  • Secure in-vehicle network gateway for OEMs and Tier-1 suppliers
  • General purpose PC interface for CANFD, LIN, KLINE, and DoIP using Vehicle Spy 3 Enterprise

 

The Freedom to Create your own Automotive IoT Solution

The optional Texas Instruments SimpleLink™ Wi-Fi® CC3235SF Wi-Fi MCU featured in the neoOBD 2 LC is compatible with popular commercial cloud-based IoT services, such as AWS IoT Core and Microsoft Azure IoT Hub, as we as other platforms and servers based on secure protocols such as HTTPS, SSL/TLS and MQTT.

For BLE applications, the neoOBD2 LC features an optional nRF52840, a programmable Bluetooth 5.2 SoC from Nordic Semiconductor supporting Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee. The SoC features a fully implemented Bluetooth Low Energy protocol stack that can be accessed from your ARM Cortex M4 application using simple API calls. The stack fully implements the Bluetooth GAP, GATT, ATT, SM, L2CAP, and Link Layer and also comes with a set of libraries that implement registered BLE services. You have the complete freedom to create any custom BLE services and characteristics as well. This SoC approach greatly reduces the code size and time to market, allowing developers to focus on application logic with no need to re-invent any of the BLE protocols.

The neoOBD2 LC also features an optional BG96 from Quectel, a LPWA LTE-M1 / NB1 / EGPRS cellular modem with built-in GPS. You have the option to host your application on either the CC3235SF Wi-Fi MCU or the nRF52840 BLE SoC by using the AT command driver provided by Intrepid.

The neoOBD2 SDK on GitHub provides examples and documentations to help you get started with your next automotive IoT project.

Vehicle Spy Application Software

Intrepid’s Vehicle Spy software fully supports the neoOBD 2 LC. With Vehicle Spy, users can monitor and transmit on all neoOBD 2 LC networks simultaneously. Vehicle Spy is required to configure standalone mode. Users can take advantage of the powerful interface to load databases and to write and debug scripts before downloading them to the device.

Standalone Logging, Scripting, Gateways and Simulation

In addition to working as a PC interface, the neoOBD 2 LC can operate in standalone mode. It can run real-time scripts, log data to internal flash memory, and simulate ECUs and gateways. These features also make it possible to run a script to reflash ECUs using data from flash memory. 

JapanKoreaChinaUSA