Getting Started
 Main

The contents of your Intrepid Hardware kit depends on the hardware purchased.  The table below describes what each kit includes:

neoVI Blue neoVI FIRE neoVI Yellow
  • neoVI Blue unit
  • USB Cable
  • RS232 Cable
  • neoNub OBDII connector and cable
  • Intrepid Control Systems Software CD Containing
    • Vehicle Spy 3*
    • Hardware Explorer
    • Drivers
    • Documentation
  • neoVI FIRE unit
  • USB Cable
  • OBDII cable
  • micro SD reader
  • Intrepid Control Systems Software CD Containing
    • Vehicle Spy 3*
    • neoVI 3G Explorer
    • Drivers
    • Documentation
  • neoVI Yellow unit
  • USB Cable
  • Rs232 Cable
  • Compact Flash Card reader
  • J1939-J1708 9 pin Deutsch
  • Intrepid Control Systems Software CD Containing
    • Vehicle Spy 3*
    • Hardware Explorer
    • Drivers
    • Documentation
neoVI RED neoVI RED Limited ValueCAN 3 (and Limited)
  • neoVI RED unit
  • USB Cable
  • OBDII cable
  • micro SD reader
  • Intrepid Control Systems Software CD Containing
    • Vehicle Spy 3*
    • neoVI 3G Explorer
    • Drivers
    • Documentation
  • neoVI RED Limited unit
  • USB Cable
  • OBDII cable
  • Intrepid Control Systems Software CD Containing
    • Vehicle Spy 3*
    • neoVI 3G Explorer
    • Drivers
    • Documentation

  • ValueCAN 3 unit
  • Intrepid Control Systems Software CD Containing
    • Vehicle Spy 3*
    • neoVI 3G Explorer
    • Drivers
    • Documentation

  * If Vehicle Spy 3 is not purchase, a limited free version will be shipped in it's place.

Installing Software and Configuration Tools 
The software and drivers for the hardware are all installed with Vehicle Spy 3 (full and free version) found on the CD that shipped with the hardware.  If Autoplay is enabled, a menu will appear with install options.  If not or if Autoplay is disabled, software can be installed from the running the vspy3_install.EXE found in the vspy3 directory of the CD.

Installing the neoVI device on USB

First verify that you have the following minimum system requirements:

If Vehicle Spy 3 is installed, the hardware drivers are also installed.  When a device is plugged in, Windows should recognize it and finish the driver install.

Installation Support

If you have any problems installing neoVI please call Intrepid Control Systems, Inc. at 810-731-7950.

Vehicle Connections

neoVI and ValueCAN devices have a copy of their pinouts on the device.  Also, please see the neoVI user documentation available from the neoVI explorer help menu.

Additional Information

Please review the following sources for more information on the neoVI vehicle interface.

 

Description

Location
neoVI Online Documentation Installed with neoVI Explorer

neoVI Website

http://www.intrepidcs.com/neovi/

Specifications on GMLAN OBD-II Cable

On the Software CD

Vehicle Spy 3 website

http://www.intrepidcs.com/vspy/

Custom application development with neoVI API

On the Software CD neovi/api/index.htm or the most recent on the web  http://www.intrepidsupport.com/

neoVI hardware silicon PDF data sheets and In-vehicle Network Information

On the Software CD "neovi/Datasheets/"

 

 neoVI   Documentation - (C) Copyright 2000-2009 Intrepid Control Systems, Inc.

Last Update: Thursday, July 09, 2009