Raw Command Summary -
Intrepidcs API
Main
Received Commands: Device
| Description | Summary |
| Device Status | Regular Interval Output from the device which contains reset and time stamp information |
| CAN Rx Buffer Overflow | Occurs when a CAN controller receive buffer is not serviced fast enough for consecutive CAN messages |
| CAN Tx Complete Msg | Occurs when a CAN message setup to transmit is sent successfully |
| CAN Error Status Changed | Occurs when the error state changes in any of the CAN controllers |
| neoVI MainPic Buffer Overflow | Occurs when the FIFO communications from the MainPic to the main51 overflows |
| neoVI Device Command Complete | Occurs when specific device commands are completed |
| SCP Transmit Complete Report | Occurs when a Ford SCP is properly transmitted by the LBCC |
| SCP Error Exception Report | Occurs when a LBCC generates an exception |
Received Commands: Main 51
| Description | Summary |
| Main 51 Rx Buffer Overflow | Occurs when the FIFO communications from the main51 to the PC overflows |
| Start Command | Used in RS232 communications to detect if a neoVI is connected to the serial port |
| Main 51 Tx FIFO Overflow | Occurs when a transmit FIFO in the Main51 overflows |
| Read EEPROM Report | Returns the EEPROM information that was requested with the read EEPROM command |
| Write EEPROM Done | |
| XX | |
| USB No Data Response | This is returned from a USB bulk read if the read FIFO is empty |
| Main 51 Device TX FIFO Error |
Received Commands: CAN Networks
| Description | Summary |
| CAN Received Message | This occurs when a valid message is received from the CAN network |
Transmitted Commands: CAN Networks
| Description | Summary |
| CAN Transmit Message | This command is sent to transmit a message on a CAN network |
Received Commands: Ford SCP/J1850 PWM
| Description | Summary |
| J1850 PWM Rx Msg |
Received Commands: J1850 VPW
| Description | Summary |
| J1850 VPW Rx Msg |
Received Commands: ISO/Keyword/LIN
| Description | Summary |
| ISO Rx Msg | This occurs when a valid message occurs on the ISO/KW2K/LIN Bus |
| ISO Tx Complete or Error Status | This occurs when a transmit message is sent or a error occurs on the ISO/KW2K/LIN bus |
Transmitted Commands: ISO/Keyword/LIN
| Description | Summary |
| ISO Tx Msg | This command is sent to transmit a message on the ISO/KW2K/LIN Bus |
Received Commands: J1708
| Description | Summary |
| J1708 Rx Msg |
| intrepidcs API Documentation - (C) Copyright 2000-2012 Intrepid Control Systems, Inc. |
Last Update: Thursday, May 22, 2003