ScriptWriteAppSignal Method - intrepidcs API
C/C++ declare - VB declare - VB.NET declare - C# declare - Parameters - Return Values - Remarks - C/C++ example - VB example - VB.NET example - C# example

This method is used to set the value of an application signal in a script running on a neoVI device.

C/C++ Declare

int _stdcall icsneoScriptWriteAppSignal(int hObject,  unsigned int iIndex, double dValue);

Visual Basic Declare

Public Declare Function icsneoScriptWriteAppSignal Lib "icsneo40.dll" (ByVal hObject As Long, ByVal iIndex As Long, ByVal dValue As Double) As Long

Visual Basic .NET Declare

Public Declare Function icsneoScriptWriteAppSignal Lib "icsneo40.dll" (ByVal hObject As Int32, ByVal iIndex As UInt32, ByRef dValue As Double) As Int32

C# Declare

[DllImport("icsneo40.dll")]
public static extern Int32 icsneoScriptWriteAppSignal (Int32 hObject, UInt32 iIndex, double dValue);

Parameters

hObject
    [in] Specifies the driver object created by OpenNeoDevice.

iIndex
   [in] The index value of the application signal.

dValue
   [in] The new value of the application signal.

Return Values

1 if the function succeeded. 0 if it failed for any reason. GetLastAPIError must be called to obtain the specific error. The errors that can be generated by this function are:

NEOVI_ERROR_DLL_NEOVI_NO_RESPONSE = 75
NEOVI_ERROR_DLL_SCRIPT_INVALID_APPSIG_INDEX = 225

Remarks

The script containing the specified application signal must have been successfully downloaded to the neoVI using ScriptLoad. The script must also have been started using ScriptStart. This function will fail if ScriptStop has been called. The valid index values for application signals within a script can be found in the cmvspy.vs3cmb.h file that is produced by Vehicle Spy. Please see Vehicle Spy documentation.

Examples

Visual Basic Example

Dim iResult As Long
Dim ValueToSet As Double

'//Set value to send
ValueToSet = Val(txtAppSigVal.Text)

'//Set App Signal
iResult = icsneoScriptWriteAppSignal(m_hObject, CLng(cboAppSig.ListIndex), ValueToSet)

If iResult = 0 Then
    txtAppSigVal.Text = "Problem!"
Else
    txtAppSigVal.Text = "Set!"
End If


C/C++ Example:

int iRetVal;
unsigned long lLastErrNum;
double dValue;

dValue = 999;
iRetVal = icsneoScriptWriteAppSignal(hObject, App_Signal_1, dValue);
if(iRetVal == 0)
{
    printf("\nFailed to write the application signal. API Error = %d", lLastErrNum);
}
else
{
    printf("\nApplication signal write succeeded\r\n");
}


C# Example:

Int32 iResult;
Double ValueToSet;

//Set value to send
ValueToSet = Convert.ToDouble(txtAppSigVal.Text);

//Set App Signal
iResult = icsNeoDll.icsneoScriptWriteAppSignal(m_hObject, Convert.ToUInt32(cboAppSig.SelectedIndex), ValueToSet);

if(iResult == 0)
{
    txtAppSigVal.Text = "Problem!";
}
else
{
    txtAppSigVal.Text = "Set!";
}


Visual Basic .NET Example:

Dim iResult As Int32
Dim ValueToSet As Double

'//Set value to send
ValueToSet = Val(txtAppSigVal.Text)

'//Set App Signal
iResult = icsneoScriptWriteAppSignal(m_hObject, Convert.ToUInt32(cboAppSig.SelectedIndex), ValueToSet)

If iResult = 0 Then
    txtAppSigVal.Text = "Problem!"
Else
    txtAppSigVal.Text = "Set!"
End If

Last Updated : Tuesday, December 30, 2008