Network Compatibility List for neoVI Devices
This table lists currently supported neoVI devices and their compatible network capabilities. The network ID in the first column is used in the icsSpyMessage structure used by GetMessages and TxMessages.
For example, if your application was written for a ValueCAN and you are sending and receiving messages on the CAN network using NETID_HSCAN, you can upgrade to a neoVI Fire or ValueCAN3 and your application does not need to change. NETID_HSCAN is a network that is supported by all neoVI devices.
The 'Network Name' for each device corresponds directly to the
names listed on the pin diagram on the bottom of the device.
| Network ID | Default Value | ValueCAN Network Name |
neoVI
Blue Network Name |
neoVI
Fire/Red Network Name |
ValueCAN3 Network Name |
neoVI
Yellow Network Name |
| NETID_HSCAN | 1 | CAN | HSCAN | HS CAN 1 | CAN 1 | J1939/CAN 1 |
| NETID_MSCAN | 2 | MSCAN | MS CAN | CAN 2 | J1939/CAN 2 | |
| NETID_SWCAN | 3 | SW CAN | SW CAN | |||
| NETID_LSFTCAN | 4 | LSFT CAN | LSFT CAN | |||
| NETID_J1708 | 6 | J1708 | J1708 | |||
| NETID_JVPW | 8 | J1850 VPW | J1850 VPW | J1850 | ||
| NETID_ISO | 9 | ISO | ISO K | ISO K | ||
| NETID_LIN | 16 | LIN | LIN1 |
| intrepidcs API Documentation - (C) Copyright 2000-2012 Intrepid Control Systems, Inc. (www.intrepidcs.com) |
Last Updated : Thursday, October 23, 2008