|
Calculated Signal Editor |
The Calculated Signal Editor (Figure 1) is an easy way to create calculated signals for Application Signals or Tx Panel signals. Last Update:
Monday, November 17, 2008
Use the Calculation Type drop down to select the desired waveform 
.
The list of choices will depend upon if the signal type is analog/digital or text.
The range of choices includes: Random Data, Sinusoidal Wave, Ramp, Triangle, Square, Custom List, Equation, Static Value, and Remote Signal.
Once a Calculation Type has been selected, fill in the parameters for that type of calculated signal in the fields below 
.
Signal information is displayed at the bottom of the editor to help enter in the proper information 
.
It gives the type, minimum, maximum, units, and the resolution of the signal being built.
The right side of the editor displays a 5 second preview showing what the output signal would look like if it was graphed 
.
Once the signal is setup click the checkmark box to set the changes 
.
Figure 1: The Calculated Signal Editor.
Vehicle Spy Documentation - (C) Copyright 1997-2011 Intrepid Control Systems, Inc.