If you are decoding an analog or digital signal you can specify how it should be displayed.  For example, you can display an analog Engine RPM signal as 1000.23423 or 1000.2.  Many formats are available in the pulldown lists as shown in Figures 1 and 2.

Here are some examples to help explain each of the analog format categories:

• 0 = rounded integer
• 0.0 = rounded to 1 decimal place
• 0.00E+00 = scientific notation rounded to 2 decimal places
• 0.000 eng = 1 letter engineering (i.e. m, k, etc.) rounded to 3 decimal places
• 0.0 engf = multi-letter formal engineering (i.e. milli, kilo, etc.) rounded to 1 decimal place
• XXXX hex = 4 characters of hexadecimal
• XX bin = 16 bits of binary

Units can be more useful when combined with the "eng" or "engf" formats.  For example, "0 eng" format with units V would format as follows:

• 0.010 V as 10 mV
• 1200 V as 1 kV
• 0.000233 V as 233 uV

For digital signals, if the format list does not have what you need (like Right/Left), you can type in any format you wish that corresponds with binary 1/0.

Figure 1: Partial list of analog formats available.	Figure 2: List of digital formats or type your own if you wish.

Vehicle Spy Documentation - (C) Copyright 1997-2011 Intrepid Control Systems, Inc.

Last Update: Tuesday, April 13, 2010