Function Block Command: Set Value

Basics:
The "Set Value" command will assign a value to a signal.

Details:
The Value parameter for this command tells which signal to set and what to set that signal to.  The Expression Builder is used to configure the signal and its value.  If the signal is a Physical IO property then MISC IO reporting in 3G Explorer must be enabled in the hardware.

Figure 1: This script will set a signal in a transmit message to 546, send the message, and stop.

Vehicle Spy Documentation - (C) Copyright 1997-2011 Intrepid Control Systems, Inc.

Last Update: Monday, July 19, 2010