| |
Product Name |
Price |
 |
ValueCAN3 (DW 2 Channel)
ValueCAN3 delivers value by being a simple, low cost, high performance, and high quality tool for connecting your PC to a Controller Area Network (CAN) bus. It has become a low cost standard for many large corporations including automotive, military, industrial networking, and heavy commercial vehicle OEMs and their suppliers. ValueCAN3 has proven itself in a wide range of applications and environments. |
$395.00 |
 |
VCAN3-LIMITED-J1939-RP1210 Kit
This kit combines our low-cost dual-wire ValueCAN (Single Channel of CAN) tool and the Heavy Duty Cable for connecting to the CAN/J1939 network on commercial vehicles. The ValueCAN's driver set includes a RP1210B DLL for use with RP1210 compliant software applications. |
$355.00 |
 |
neoNub Blue
The neoNub OBD-II / J1962 adapter is a connector that converts the neoVI db25 to the OBD2 connector. |
$25.00 |
 |
NEOVI-OBD-1
DSUB-25 pin to OBD II Connector. This cable is suitable for connecting most neoVIs to OBD II connector. |
$35.00 |
 |
NEOVI-OBD-CAN-1
This cable can be used with neoVI-FIREs and neoVI-REDs to connect to the OBD connector and a separate CAN accessory at the same time (ie: data acquisition.) DB-25 connects to neoVI, converts to one OBD + one DB-9 CAN channel. |
$125.00 |
 |
neoVI-Yellow J1939-J1708 Cable
Deutsch 9-pin to DB15M connector, for use with the neoVI-Yellow. This cable supports Dual CAN. |
$59.95 |
 |
ValueCAN J2284 OBD-2 Cable
This cable is used to connect a ValueCAN to the J2284 network via the OBD-2 connector. |
$25.00 |
 |
VCAN J1939-RP1210 Cable
This cable is used to connect a ValueCAN to the CAN/J1939 network on commercial vehicles. The vehicle end connector is the industry standard 9-pin Deutsch connector. |
$65.00 |
| |
VCAN3-OBDII-MSHSCAN Cable
This cable connects our ValueCAN3 hardware to HSCAN & MSCAN networks via the OBD2 connector. |
$45.00 |
 |
ValueCAN3 Y Cable to 2 x DB-9
Y-Splitter to split the two CAN channels of a ValueCAN3 to match the DB-9 pinout of a ValueCAN2. |
$45.00 |
 |
OBD2 Y-Splitter
This product is a Y splitter for a J1962 OBD vehicle adaptor. All pins on all 3 connectors are populated. This cable can be used to connect 2 OBD tools to one vehicle at the same time. |
$50.00 |
 |
neoVI BoB
Breakout Box for neoVI FIRE provides DB-9 breakouts for HSCAN1, HSCAN2, HSCAN3, MSCAN and LSFTCAN; banana-plug breakouts for SW CAN, LIN1-LIN4, MISC1 through MISC4, J1850VPW, V-BAT, T-CLK H and T-CLK-L. |
$350.00 |
 |
neoVI DLC LineSpy
The neoVI DLC LineSpy Break Out Box is allows you to connect your neoVI FIREor neoVI RED hardware devices to the vehicle's DLC while simultaneously monitoring the physical pins of the connector. With each of the 16 pins available for banana jack or oscilloscope probes, LineSpy gives you an open connection to your vehicle's networking systems. |
$195.00 |
