neoVI RED: 2xCAN (1 selectable: DWCAN, SWCAN, LSFTCAN), 2xLIN

Multiple Protocol Tool to Support Today’s and Tomorrow’s Vehicle Bus Needs

Intrepid Control Systems introduces neoVI RED; newest in our line of vehicle network development tools. neoVI RED fills the need for multiple CAN and LIN channels as well as giving you a 0-20 volt oscilloscope to troubleshoot physical layer issues with LIN and a logic analyzer for CAN. neoVI RED is a low cost, high value CAN and LIN bus interface that fits in your pocket.

Connect to multiple CAN and LIN Busses Simultaneously

With its two CAN and two LIN channels, neoVI RED will allow you to view network traffic on all four networks simultaneously with an accuracy of 10 microseconds. With multiple CAN channels becoming more and more the norm, neoVI RED will allow you to view both channels as well as view that of it’s two LIN channels without missing a message.

Log Data to Internal Memory Card without a PC

neoVI RED supports a MicroSD card for trouble-free datalogging. Now you can log data without your PC. Setup neoVI RED - Logger including message filtering with Intrepid Control Systems’ Vehicle Spy software, disconnect from your PC and log vehicle network traffic until the card is full. neoVI RED supports logging on all networks simultaneously with no latency issues.

Embedded Scripting and Automation - Function Blocks

Easily setup automated scripts such as transmitting multiple messages at a given interval and much, much more using neoVI RED’s internal scripting engine. With Intrepid Control Systems’ Function Blocks, you can use an easy-to-use, mouse driven interface that creates simple yet powerful automated tasks embedded on the hardware itself.

In Addition ...

• neoVI is Designed for Automated Testing
• neoVI is a Smart Interface for Data Logger Applications
• and much much more!

Device Specifications

• neoVI 3G Architecture over 10x performance over previous devices
• 3 DSPs and 1 RISC processor for 125 MIPS of processing
• Power Consumption (typical) : 150mA @ 14.4 VDC
• Sleep Power Consumption (typical) : 12mA @ 12.0 VDC
• Power Supply: 4.5-27 Volt Power Operation (Physical layers non functional under 5.5 volt)
• Dual user notification LED (red and green)
• Temperature Range: -40C to +85C
• Physical Dimensions (with boot): 5 x 3 x 1.2" (12.9 x 7.6 x 3 cm); 5.5oz (157 g)
• Vehicle Connectors : 25 Pin male D-SUB and 9 Pin Male D-SUB
• Warranty: One Year Limited Warranty
• Firmware: Field upgradeable design (flash firmware)
• General Purpose IO: 6 MISC IO (0 - 3.3V), 4 IO can be configured as analog
• General Purpose IO rate report interval: 10 Hz to 1 Khz or based on digital change
• Microsoft Certified USB drivers
• Isolated USB
• Stand-Alone Mode Including Scripting, Receive Messages, Transmit Messages, Expressions, IO, and Transport Layers
• J2534 and RP1210 A/B compatible for CAN/ISO15765, Keyword, ISO9141, and J1850 VPW.
• microSD card slot support for up to 16 Gigabytes of storage (or up to the limit of newer SDHC cards). The removable card is formatted using FAT32 for direct usage in a PC.
• Battery backed real time clock (RTC).

Networks - General

• 64 Bit time stamping to accuracy of 10 microseconds on CAN and LIN networks and never overflows. 0.5 microsecond accuracy timestamp available if using one network only.
• Simultaneous operations on all CAN/LIN/J1850 networks.
• Transmit message double-buffering on all networks allows back to back message transmission.

Network Specifications

6x CAN Channels

• 4 Dedicated ISO11898 Dual Wire CAN Physical Layer (TJA1040)
• 1 Dedicated ISO11519 Low Speed Fault Tolerant CAN Physical Layer (TJA1054A)
• 1 Dedicated Single Wire CAN Physical Layer GMW3089 / SAE J2411 (MC33897)
• CAN 2.0B Active
• Up to 1 M-Bit Software Selectable Baud Rate (auto baud capable)
• Capable of generating and detecting error frames (With firmware update)
• Logic Analysis of CAN Waveform with 25 nanosecond resolution (With firmware update)
• Graphical Bit Time / Baud Rate Calculator
• Listen only mode support
• Unterminated network detection (With firmware update)
• High Speed Mode, Test Tool Resistor, and High Voltage Wakeup support

4x LIN (Local Interconnect), ISO9141, Keyword 2000, or K and L Line

• Full support for LIN 1.X, 2.X and J2602
• LIN J2602 / 2.X compatible physical layer
• Software enabled 1K LIN Master Resistor PER CHANNEL
• Capable of Generating LIN Waveforms (Including Errors) Using Dedicated Output Compare Hardware (With firmware update)
• LIN Bus Monitor Mode identifies errors: Sync Break Error State and Length, Sync Wave Error, Message ID parity, TFrameMax/Slave Not Responding, Checksum Error and Transmit Bit Errors.
• LIN Bus Master Mode operates at same time as LIN Bus Monitor
• LIN Bus Slave simulation - with or without an LDF file
• LIN Bus hardware schedule table with support for LIN diagnostics
• UART Based State Machine
• Only first channel supports L
• Programmable Timing Parameters including Inter-Byte, TX Inter-Frame, RX Inter-Frame and Initialization Waveforms (0.5 ms Resolution)
• Initialization Waveforms including Fast Init, Five Baud, and Custom
• Software Selectable Baud Rate
• Software enabled 512K Resistor (channel one only)

1x J1850 VPW (GM Class 2)

• VPW Physical Layer capable of TX and RX operations (MC33390)
• Reception of IFR data during TX and RX

1x GM CGI

• Software Enabled (disables LIN2)
• Programmable Bit Rate (625K, 115.2K, others)
• Full block mode message reception only
• Transmission Option available in CGI Simulation Toolkit

LINKS:

• neoVI RED Product PDF
• Help Documentation
• neoVI - DLL Documention